Open 150 rpm l shape motor Cheap made in China – replacement parts – in Abuja Nigeria Top Steel Drum Production Line with top quality

Open 150 rpm l shape motor Cheap  made in China - replacement parts -  in Abuja Nigeria  Top Steel Drum Production Line with top quality

We – EPG Team the greatest worm gearbox, couplings and gears manufacturing facility in China with 5 diverse branches. For more specifics: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /

Full steel drum manufacturing line

 

I. Uncooked resources intake/manufacturing potential
 

Plate thickness (mm) Finihed drums (pcs/T) Manufacturing potential (kg/computer)
1.2 forty one 21.5
1.0B Up and bottom covers 1.two 47 19
Drum entire body 1.
1. 50 eighteen
0.9B Up and bottom addresses 1. 54 16.8
Drum physique .nine
0.9 56 sixteen.two
.eight   97 ten.28

 

II. Comprehensive metal drum production facilities

A. Front segment gear
one. Decolier
2. Hydraulic Up-coiling gadget
three. Hydraulic supporter
4. Side deviation rectifying system
5. Sizing & flattening device
six. Reducing machine – for drum physique
7. Reducing equipment – for squander sheet
8. Arch shape guiding device
9. Stac ept car
ten. Hydraulic technique
eleven. Electrical handle program
12. Leading & Base cover conveyor gadget

1.Hydraulic Up-Coiling  Device

   a) Up-Coiling Assistance System is for storing steel coil and facillitate Materials Feed Trolley for offering content.

   b) Content Feed Trolley is utilized for carry steel coil.. It is operated with hydraulic system to drive cylinder for

   reciprocating linear motion and gear box to produce steel coil in parallel to the center of uncoiling device so as to

   assure the fixing.

2.Decoiler & Hydraulic Supporter

a)Uncoiling width: 916-1320mm

b)Plate thickness: .6-1.2mm

c)Motor power: 5.0KW

d)Uncoiler capacity: 10t

e)Within diameter: ¢470-520mm, Outside diameter: ≤¢1200

f)Equipment measurement: 3900x1500x1940(mm), Whole bodyweight: 5T

3.Sizing &Flattening Machine
Limited introduction:7 rollers working,servo computerized sizing,worm and gear modify the leveled plate thickness.

Perform:The clearances of up and down rollers can be adjusted by the upper hand-wheel while figure can be shown by dial indicator. The operation linear speed is adjusted step-considerably less. It can be controlled by the signal of mid-bridge for high and low speed change. 

Main technics:

a)Plate width: 916-1320(mm)

b)Plate thickness:.6-1.2(mm)

4. Slicing Equipment
Operate: Cut the leveled steel plate into drum entire body.

Major technics:

a)Plate width:≤1500mm

b)Plate thickness:≤3mm

c)Motor energy: 3.0KW

d)Cutting capability:≤20 instances/min

e)Device dimension:1800x950x1500(mm),Overall excess weight: 3T

 5.Hydraulic Station

Operate:Provide oil for the oil cylinder of decoiler, lifting unit,uncoiling supporter,and overturn machine to make confident stably operating.

Primary technics:

a)Motor energy:7.5KW

b)Equipment size:800x800x1500(mm),Complete bodyweight: .5T

six.Electric Management Method
Perform: Handle the decoiler,flattening device and other front part equipments working.

B. Cover gear
1. Prime & Base cover mould
two. Double loc ept mould
3. 63T pressing device
4. 160T pressing equipment
five. Pre-coiling & Gluing machine

one. Top & Base cover mould

Limited introduction:Equipped with two sets of 160T urgent machines

Function: Punching the bottom include

Principal technics:

a)Motor power:18.5KW

b)Wor ept capability:5-26 pcs/min

c)Device dimensions:2185x1420x3070(mm),Overall weight: 14.5T

2.Drum Injection Mould

Short introduction: Geared up with one particular established of 63T urgent equipment

Double punching mould: punch oil filler and breathable mouth of the bottom go over.

Device dimensions: 710x480x300(mm)

Complete bodyweight: .5T

Double loc ept mould: lock oil filler and breathable mouth of the bottom protect.

Equipment dimension: 710x480x300(mm)

Overall excess weight: .5T

Major technics:

a)Motor electricity: 11KW

b)Equipment dimensions :1800x1232x2550(mm)

c)Whole bodyweight: 5.5T

three.Pre-Coiling & Gluing Machine

Brief introduction: Pre-coiling machine for the base go over, cylinder thrust the cam to operate, automated glue- spaying program.It has rewards of basic safety,stablity, clean edging.

 Main technics:

a)Machine dimensions:1600x1400x1350(mm)

b)Complete excess weight: 4.5T

C. Middle section tools

one. Stac ept table
two. Circle-rolling device
3. Seam welding device
4. Edging & Beading device
5. Corrugation (W Rib) device
six. Edge-curling device
seven. Express system
8. Electric handle system
9. Leakage chec ept equipment

1.Circle-rolling Device

Brief introduction:3 rollers functioning.

Main technics:

a)Rolled plated width:≤1100mm

b)Plate thickness:.6-1.2(mm)

c)Circle diameter:≤570mm

d)Motor electricity:1.5KW

e)Machine size:2200x750x1300(mm),Total fat: 1.5T

two.Seaming Device(BH-one hundred fifty-5Z)

Brief instruction:This computerized seaming equipment dismisses the spot welding process,it is our recently  developed drum seaming equipment.All of parts adopts domestic outstanding raw material,cupreous welding rollers.

Primary technics:

a)Welding Machine capability:150KVA

b)Driving variety: pneumatic 

c)Existing: alternating recent

d)Frequency variety: large frequency

e)Wor ept theory : contravariant 

3.Edging&Beading Equipment

Short introduction:controlled by PLC,hydraulic generate

Principal technics:

a)Beading top:≤14mm

b)Drum height:894-905(mm)

c)Hydraulic technique force:8Mpa

d)Air stress:.1Mpa

e)Equipment dimensions:3700x700x1600(mm),Whole fat: 5T

Hydraulic Station:

Main technics:

a) Device dimension: 1800x860x1700 (mm)

b) Total excess weight: 1T

c) Motor power: 22KW

four.Corrugation (W rib) Machine

Limited introduction:controlled by PLC,hydraulic travel

Main technics:

a)Corrugating top:≤3mm

b)W rib top:≤9mm

c)Drum top:884-895(mm)

d)W rib area:280mm

e)Motor electrical power:11KW

f)Machine size:4500x650x2100(mm),Total bodyweight: 7T

Hydraulic station:   

a)Machine dimensions:1800x860x1700(mm)

b)Complete weight: 1T

c)Motor energy: 7.5KW

5.Edge-Curling Equipment

Brief introduction:controlled by PLC,hydraulic travel,7 layers edge curling.

Major technics:

a)Drum peak:886-897(mm)

b)Motor energy:45KW

c)Device dimensions:4800x1300x2200(mm),Total bodyweight: 13T

Hydraulic station:   

a)Equipment dimension:1800x860x1700(mm)

b)Total excess weight: 1T

c)Motor electricity: 7.5KW

6.  Leakage Chec ept Device

Short introduction:Handbook/computerized handle,pneuma lock.

Primary technics:

a)Chec ept drum diameter:560-570(mm)

b)Drum height:886-897(mm)

c)Stress:.03Mpa

d) Device measurement:2530x700x1100(mm),Complete bodyweight: 2T

7.Multi-part Express Device

Short introduction:Express the drum entire body to be edged,beaded,Corrugated W rib bolstered and sealed bottom include with PLC managing.

Major technics:

a) Motor electricity:4.0KW

b) Machine measurement:11000x2100x1000(mm)

c) Overall weight: 3T

D. Rear area tools
one. Front area trans-line
2. Degreasing & Phosphorization space
three. Washing & Drying space
4. Overturn equipment
5. Portray area
six. Front drum-separation machine
seven. Drying area right after portray
eight. Bck drum separation equipment
nine. Air cooling technique
10. Rear part trans-line
11. Electric powered manage method

one. Degreasing & Phosphorization Room

Quick introduction: This element is utilized to transport the drums,controlled by PLC, adopts spraying device to automated thoroughly clean the coil, phosphorize and washing the grease on the drums. The conveyor device adopts outstanding metal, inwalls are created of  1mm steel plate.

Major technics:

a)Device dimension:36000x2110x2060(mm)

b)Complete weight: 30T

2. Washing & Drying Space

Brief introduction:Drying the drinking water on the surface of the drum, controlled by PLC.The entire device adopts fuel heating products.Admirer is set up on the best of the space, so that hot and cycling wind can be produced to pace up the drying.

Main technics:

a) Motor electricity:25KW

b) Device dimensions:20000x1920x3600(mm)

c) Overall bodyweight: 25T

three.Portray Place(double colours)


Operate:  The conveyor gadget is controlled by PLC, rotating table make the drums intently, portray technique paint the drums in & outside with the spray gun. One shade or various can be option. Manner of water-curtain spraying dispels spraying smoke.Nozzle adopts Nordson Brand, Portray gear is manufactured of Chang Jiang.

Primary technics:

a) Motor energy: 55KW

b) Machine dimension: 7400x4990x3600(mm)

c) Total excess weight: 15T

four.Entrance Drum Distributor

Purpose: Transportation the drums to the conveyor line of outside painting&stiffening place, the cylinder is controlled by PLC.

Major technics:

a) Motor energy: 2.0KW

b) Device size: 1500x1050x800(mm)

c) Complete fat: 1T

5.Drying Line after Portray

Function: The conveyor device is managed by PLC, adopts fuel heating inwall of the room is equipped with heating tubes. Fan is mounted on the prime of the room, so that dry the paint.

Primary technics:

a) Motor electricity: 35KW

b) Device dimensions: 36000x2100x4300(mm)

c) Total excess weight: 30T

6.Down-drum Roller Trans-line

Purpose: The unit transports the dried drums to the ground.

Primary technics:

a) Motor electrical power: 1.5KW

b) Equipment size:2000x900x800(mm)

c) Whole fat: .3T

7.Overturn Gear

Operate: Modify the point out of drums from horizontal to vertical, so that it will be much easier to paint, controlled by Cylinder.

Main technics:

a) Device dimension: 1400x690x850(mm)

b) Complete fat: .5T

 

 

 

 

 

 

   

 

 

 

 

 

/ The use of first products manufacturer’s (OEM) element figures or trademarks , e.g. CASE® and John Deere® are for reference needs only and for indicating merchandise use and compatibility. Our firm and the outlined alternative parts contained herein are not sponsored, accepted, or produced by the OEM. /

Open 150 rpm l shape motor Cheap  made in China - replacement parts -  in Abuja Nigeria  Top Steel Drum Production Line with top quality

Open 150 rpm l shape motor Cheap  made in China - replacement parts -  in Abuja Nigeria  Top Steel Drum Production Line with top quality

Recent Posts

Rigid Coupling

As one of rigid coupling manufacturers, suppliers and exporters of mechanical products, We offer rigid coupling and many other products.

Please contact us for details.

Mail: [email protected]

Manufacturer supplier exporter of rigid coupling.