Observing a few guidelines for right installation is important for the reputable and proper operation of the gearbox or gear motor.
The guidelines set out listed here are meant as a preliminary guidebook to choosing gearbox or gear motor. For powerful and correct installation, comply with the guidelines provided inside the installation, use the maintenances manual for your gearbox available from our income department.
Following can be a brief outline of set up rules:
a) Fastening:
Place gearbox on a surface providing satisfactory rigidity. Mating surfaces ought to be machined and flat.
Mating surfaces need to be inside definite geometric tolerances (see manual). This is specially accurate of flange-mounted gearboxes with splined hollow shafts.
In applications that involve high radial loads in the output finish, flange mounting is suggested for some gearbox sizes as this mounting tends to make use of the double pilot diameters presented in these gearboxes.
Make certain the gearbox is ideal for that needed mounting place.
Use screws of resistance class 8.eight and over to safe the gearbox. Torque up screws towards the figures
indicated within the relevant tables.
With transmitted output torque higher than or equal 70% in the indicated M2max torque, and with
regular movement reversals, use screws with minimal resistance ten.9.
Some gearbox sizes is often fastened using either screws or pins. Of pin seated inside the frame the gearboxes be no less than one.5 times pin diameter.
b) Connections
Secure the connection elements to gearbox input and output. Never tap them with hammers or comparable equipment.
To insert these parts, utilize the support screws and threaded holes supplied about the shafts. Be sure you clean off any grease or protects from your shafts ahead of fitting any connection components.
Fitting hydraulic motors.
Be careful the O ring among motor flange and gearbox input flange when assembling. Set up the
hydraulic motor before filling lube oil into the gearbox.
Connecting the hydraulic brake.
The hydraulic circuit needs to be this kind of to be sure that brake is released instants in advance of gearbox starts and applied immediately after gearbox has stopped. Examine that stress during the hydraulic line for brake release is at zero every time gearbox is stopped.
Path of rotation
Motors are linked to your appropriate electrical or hydraulic circuit based on their direction of rotation.
When executing these connections, bear in mind that all gearboxes, whether while in the in-line or correct angle design and style, have the exact same course of rotation each at input and output. For far more specifics with the connection of electrical and hydraulic motors, see relevant sections within this catalogue.


Recent Posts

Rigid Coupling

As one of rigid coupling manufacturers, suppliers and exporters of mechanical products, We offer rigid coupling and many other products.

Please contact us for details.

Mail: [email protected]

Manufacturer supplier exporter of rigid coupling.