Coupling Grease

Why Coupling Grease?
Sufficient lubrication is vital for satisfactory gear coupling operation. Gear Coupling Grease is especially created for gear coupling applications to improve coupling daily life even though significantly decreasing upkeep time. Its substantial viscosity base oil and tackifier combine to keep the grease in area and stop separation and it can be in total compliance with NSI/AGMA 9001-B97 lubrication suggestions.
Coupling Grease is dark brown in shade and produced by using a lithium soap/polymer thickener, which has superior resistance to oil separation when subjected to higher centrifugal forces commonly observed in couplings. Bearing or general function greases tend to separate and shed effectiveness due to higher centrifugal forces to the several ingredients at high rotational speeds. These higher centrifugal forces encountered in couplings separate the base oil through the thickeners. Heavy thickeners, which have no lubrication attributes, accumulate within the gear tooth mesh place resulting in premature coupling failure. Gear Coupling Grease is created to hugely resistant to centrifugal separation in the oil and thickener, which will allow the lubricant to get made use of for any rather extended time period of time.
One of several secrets and techniques on the good results of Gear Coupling Grease could be the variable consistency through the entire doing work cycle with the application. The consistency of our gear coupling grease modifications together with the operating conditions. Doing work with the lubricant under real support conditions leads to the grease to come to be semi-fluid, functionally solash lubricating the dress in surfaces with the coupling. Because the grease cools, it returns to your authentic consistency, therefore avoiding leakage.
Gear Coupling Grease is accessible from stock in 14 oz. cartridges, one lb. and five lb. cans.
Minimizing of coupling wear
Resistance to water washing
Corrosion and rust safety
Substantial load carrying abilities
Extended relubrication frequency
Use at temperatures up to 325° F
Staying in place beneath substantial speeds
Resistance to centrifugal separation
Reduction in down time & upkeep cost
Gear Coupling Grease has a consistency which overlaps the NLGI grades 0 and one. This grease is specially formulated using a lithium/polymer thickener and fortified with corrosion, oxidation, extreme pressure, and a effective rust inhibitor additive package.


Recent Posts

Rigid Coupling

As one of rigid coupling manufacturers, suppliers and exporters of mechanical products, We offer rigid coupling and many other products.

Please contact us for details.

Mail: [email protected]

Manufacturer supplier exporter of rigid coupling.